Product description
Sprenger KK ULTRA D-Ring Bit double jointed
- anatomically adapted mouthpiece
- centre piece shortened and tilted forward by 45
- noticeable improvement in effectiveness compared to conventional double jointed bits
- enables finer aids and improved contact
- direct transmission of rein aids to the tongue and lower jaw thanks to fixed side pieces
- stays in the horse's mouth, gentle on the corners of the mouth
- lateral restriction helps when riding turns, especially with horses that tend to break out over the shoulder
- when the reins are pulled, the centre piece of the KK ULTRA bit lies flat on the tongue without squeezing or exerting pressure on the palate and bars
- when used correctly, this promotes the horse's trust in the rider's hand, which is why these bits are used successfully worldwide in all disciplines and at all levels of training
- the fixed side pieces of this bit allow the rein aid to be transferred directly to the horse's tongue and lower jaw
- they also protect the sensitive corners of the mouth and provide slight lateral restriction, allowing the bit to sit particularly calmly in the horse's mouth
Material
- Sensogan (alloy of copper, manganese and zinc)
- stainless steel sides.
Features
- thickness: 15 mm
- ring size: 80 mm
- width: 12.5 cm / 13.5 cm / 14.5 cm
- double jointed
LPO approval
- approved for all types of competitions with bridle
Care
- always wash thoroughly with water and dry after each use.
- sensogan bits contain copper, which oxidises and causes the bits to darken and lose their shine.
- however, metal bits are particularly easy to clean and maintain with Diamond Paste
Product features
Bit types: | D-Ring Bits |
Mouthpiece: | Double broken |
Shape: | anatomical |
Riding Style: | Dressur, Springen |
Bit width: | 12,5 cm, 13,5 cm, 14,5 cm, 15,5 cm |
Material: | Sensogan |
Gebissstärke: | 15 mm |
property: | anatomisch |
Artikelnummer: | FR43920 |
EAN | 4022853203694 |
Hersteller
Herm. Sprenger Metallwarenfabrik GmbH & Co. KG
Alexanderstraße 10-21
58644 Iserlohn
Telefon: +49 (0) 2371 - 9559-0
E-Mail: herm.sprenger@sprenger.de
Internet: www.sprenger.de